Engineering, 25.04.2020 02:12 agarza0326

A particular motor operates at 10 revolutions per second when its controlling inpul voltage is 3.7 V. Assume that you are using a microcontroller with a PWM whose output port can be set high (5 V) or low (O V). (a) Compute the duty cycle necessary to obtain 10 revolutions per second. (b) Provide values for a pulse width-and period that achieve this duty cycle. You do not need to consider whether the frequency is too high or too low allhough the values should be reasonable. There is no one correct answer

Answers

Answer from: Quest

answer:

you cant but you can report the sender

and do you want to talk?

im xavier btw but i go by x

explanation:

Answer from: Quest

answer:

explanation:

Answer from: Quest

answer: i have no clue tbh

explanation:

it happens to me to tho

Answer from: Quest

answer:

located where wight collar workers are

explanation:

Other questions on the subject: Engineering

Engineering, 04.07.2019 18:10, oshawn108

Ahot wire operates at a temperature of 200°c while the air temperature is 20°c. the hot wire element is a tungsten wire of 5 um diameter and 2 mm in length. plot using excel current, heat transfer and heat generated by the wire for air velocity varying from 1-10 m/s in steps of lm/s? matlab the sensor voltage output, resistance, or assume nu 0.989 re033pr13 take air properties at tr (200°c20°c)/2 = 110°c properties of tungsten: c 0.13 kj/kg. k 3 p 19250 kg/m k (thermal conductivity) = 174 w/m. k

Answers: 2

continue

Engineering, 04.07.2019 18:10, QueenLife4869

Awall of 0.5m thickness is to be constructed from a material which has average thermal conductivity of 1.4 w/mk. the wall is to be insulated with a material having an average thermal conductivity of 0.35 w/mk so that heat loss per square meter shall not exceed 1450 w. assume inner wall surface temperature of 1200°c and outer surface temperature of the insulation to be 15°c. calculate the thickness of insulation required.

Answers: 3

continue

Engineering, 04.07.2019 18:20, karatsgrande3772

Determine the damped natural frequencies and the steady state response of a decoupled damped forced two degrees of freedom system. 10ä1 + 2q1 20q1 10 cos t; 10q2 +4q2 + 40q2 10 cos t

Answers: 3

continue

Engineering, 04.07.2019 19:10, Lexi5170

A)-explain briefly the importance of standards in engineering design. b)- what is patent? c)-explain the relationship between these standards: b. s. and b. s.en d)- in engineering design concepts, types of loads and how they act are important factors. explain.

Answers: 3

continue

You know the right answer?

A particular motor operates at 10 revolutions per second when its controlling inpul voltage is 3.7 V...