subject
Engineering, 02.11.2019 03:31 sajdshjad751

Robert works part-time for jj financial planning, where he develops financial plans for clients. he asks clients a series of questions about their current finances and investment objectives, and uses their answers to create customized financial plans. these plans often include recommendations that they purchase insurance or variable annuities, opening iras or other types of retirement accounts. robert charges a fee for the plans, but he does not earn commissions for selling clients variable annuities and insurance to implement their plans. is robert an investment adviser representative

Answers

ansver
Answer from: Quest

how is this a question? in order for me to answer it i have to understand the question

explanation:

ansver
Answer from: Quest

answer:

constructing a building's framework requires a solid foundation

explanation:

ansver
Answer from: Quest
What? im so confused
ansver
Answer from: Quest

hes mad if he says,

explanation:

r!

Other questions on the subject: Engineering

image
Engineering, 04.07.2019 18:10, keigleyhannah30
Aplate clutch has a single pair of mating friction surfaces 250-mm od by 175-mm id. the mean value of the coefficient of friction is 0.30, and the actuating force is 4 kn. a) find the maximum pressure and the torque capacity using the uniform-wear model. b) find the maximum pressure and the torque capacity using the uniform-pressure model.
Answers: 3
image
Engineering, 04.07.2019 18:10, Tyrant4life
Draw the engineering stress-strain curve for (a) bcc; (b) fcc metals and mark important points.
Answers: 1
image
Engineering, 04.07.2019 18:20, miguel454545
Along 8-cm diameter steam pipe whose external surface temperature is 900c connects two buildings. the pipe is exposed to ambient air at 70c with a wind speed of 50 km/hr blowing across the pipe. determine the heat loss from the pipe per unit length. (b) air at 500c enters a section of a rectangular duct (15 cm x 20 cm) at an average velocity of 7 m/s. if the walls of the duct are maintained at 100c. a) the length of the tube for an exit temperature of the air to be 40 0c. b)the rate of heat transfer from the air. c) the fan power needed to overcome the pressure drop in this section of the duct.
Answers: 1
image
Engineering, 04.07.2019 19:20, lordcaos066
Determine the time of the day and month of the year at which the peak sensible cooling load occurs for a top floor, north-eastern corner room of an office building in durban for the following conditions: floor area: 8 x 8 x 3 m east and north walls: 115 mm face brick (outside), 20 mm air space, 115 mm ordinary brick (inside) with 15 mm plaster roof construction: suspended plasterboard ceiling, 450 mm air space, 150 mm concrete, 75mm screed, waterproofing no heat transfer across other surfaces window area 3x 1,5 m high in north wall only. ordinary glass with venetian blinds. lights and occupants : from 07: 00 to 18: 00 average light density: 25 w/m2 number of occupants : 5 seated, light office work room temperature 24°c
Answers: 3
You know the right answer?
Robert works part-time for jj financial planning, where he develops financial plans for clients. he...

Questions in other subjects:

Konu
Mathematics, 01.05.2021 04:40